Soundcore earbuds are wireless headphones that offer high-quality sound and noise cancellation. They are compatible with most Bluetooth devices, which also includes iPhones. To connect Soundcore earbuds to your iPhone, you need to follow the instructions given in this guide.
Preparing Your Earbuds and iPhone for Connection
Before you can start connecting your earbuds to your iPhone, you need to make sure that both devices are ready for pairing.
Step 1: Turn on Bluetooth on your iPhone.
You can do this by swiping down from the top-right corner of the screen. Next, proceed by tapping on the Bluetooth icon. Alternatively, you can also get to the Settings app and select the Bluetooth option.
Step 2: Go to the Settings app
On your iPhone, you have to scroll to the Settings app and tap on the Bluetooth option. This will bring up a list of available devices that you can go through and choose the one you would like to pair with your iPhone.
Step 3: Charge the Earbuds
However, you have to make sure that your earbuds are charged and have enough battery life to continue. By looking at the LED indicators on the charging case, you can check the battery level of your earbuds. If you find a solid white light then it means that the earbuds are fully charged, while a flashing red light means that you need to charge the earbuds and they are low on battery.
Connecting Soundcore Earbuds to iPhone
Once you have prepared your earbuds and your iPhone, you can proceed to connect them.
Step 1: Turn on Pairing Mode
You have to put your earbuds into pairing mode. To continue, you can do this by taking them out of the charging case and holding the touch controls on both earbuds, and that too for 3 seconds. Next, you will hear a voice prompt that says “Pairing” and along with that, the LED indicators will flash white and blue alternately.
Step 2: Choose the Earbuds
You have to select your earbuds from the list of available devices on your iPhone. Next, you will find the name of your earbuds on the screen, such as “Soundcore Liberty Air 2” or “Soundcore Life P2”. Finally, tap on the name to connect and you will hear a voice prompt saying “Connected”. You will find that the LED indicators will turn solid white.
Troubleshooting Common Issues
Sometimes, you may encounter some issues when connecting your earbuds to your iPhone. Here are some common problems and how to fix them:
Glitch 1: Earbuds Not Pairing
If your earbuds are not showing up on the list of available devices on your iPhone, you may need to reset them. To do this, put them back into the charging case and close the lid. Then, open the lid and press and hold the button on the back of the case for 10 seconds. You will see the LED indicators flash red 3 times. This means that the earbuds have been reset and are ready for pairing again.
Glitch 2: If You Find One Earbud Not Working
If you can only hear sound from one earbud, then the only way out is – you may need to reconnect them. To continue with this, you have to put the earbuds back into the charging case and close the lid. Then, take the earbuds out and put them into pairing mode again. A voice prompt saying “Pairing” can be heard and the LED indicators will flash white and blue alternately. Finally, you have to select your earbuds from the list of available devices that would be on your iPhone and try to connect them again.
Glitch 3: Resetting Earbuds
If you want to erase the pairing history of your earbuds and start fresh, you can reset them. To do this, put them back into the charging case and close the lid. Then, open the lid and press and hold the button on the back of the case for 10 seconds. You will see the LED indicators flash red 3 times. This means that the earbuds have been reset and are ready for pairing with a new device.
Conclusion
Now that you have a clear understanding of how to connect Soundcore earbuds to your iPhone, you can apply the steps and enjoy your favorite music. Also, certain common problems have been discussed, which you can fix all by yourself.